Bosch Evolution wiper blades fits the most popular hook, pin and OE wiper arm types, and offers one step installation for over 90% of vehicle applications.
Bosch Evolution fits all the most popular wiper arm types.
- 9 x 3 hook
- 9 x 4 hook
- Small pin
- Large pin
- OE specialty applications
A helpful tip from our expert: If you do not feel like you want to replace wiper blades too often, here is a good tip you should consider. Grab any glass water repellent and rub your windshield with it. Such liquids are usually not too expensive, and will help you prolong the life of your wiper blades. Water repellents create a thin transparent film over your windshield and the raindrops simply get blown off when you drive. Besides, when the glass is treated this way, it becomes extremely smooth and easy-to-glide for your wipers. So, it minimizes wear-and-tear of the wiper blades and prolongs their lifespan.
How to install Bosch Evolution wiper blades (Hook)
- Remove the cardboard sleeve;
- Tear cardboard flap up, then pull the plastic sleeve out;
- Remove wiper blade from the plastic sleeve;
- Pinch the sides of the adapter housing and pull back;
- Insert the hook of the wiper arm through opening in the adapter housing;
- Align the wiper arm hook with the adapter and slide the wiper blade up tu lock into place;
- Close adapter housing. Ensure wiper blade is fully attached before use.
Bosch Evolution Wiper Blade Installation (Side Lock)
- Remove the cardboard sleeve;
- Tear cardboard flap up, then pull the plastic sleeve out;
- Remove wiper blade from the plastic sleeve;
- Position the wiper blade upside down next to wiper arm. Align the wiper arm rod with the circular opening in the adapter;
- Slide the wiper blade adapter into the wiper arm and rotate the wiper blade down;
- The tab on the wiper arm will lock the wiper blade into place. Ensure the wiper blade is fully attached before use.
How to install Bosch Evolution wiper blades (Top Lock)
- Remove the cardboard sleeve;
- Tear cardboard flap up, then pull the plastic sleeve out;
- Remove wiper blade from the plastic sleeve;
- Push down on the adapter button while sliding off the cover;
- Remove the cover;
- Position the wiper blade next to the wiper arm;
- Firmly guide the wiper blade adapter into the wiper arm;
- The button on top of the adapter must lock into the hole of the wiper arm. Ensure wiper blade is fully attached before use.
Bosch Evolution Wiper Blade Installation (Valeo Top Lock)
- Remove the cardboard sleeve;
- Tear cardboard flap up, then pull the plastic sleeve out;
- Remove wiper blade from the plastic sleeve;
- Push down on the adapter button while sliding off the cover;
- Remove the cover;
- Position the wiper blade next to the wiper arm;
- Insert the wiper arm tip into the slot in the adapter;
- Pinch the adapter side tabs as you rotate the wiper blade towards the wiper arm;
- The side tabs will lock on to the wiper blade adapter. Ensure that the wiper blade is fully attached before use.
Bosch Evolution Wiper Blade Installation (Valeo Top Lock BMW)
- Remove the cardboard sleeve;
- Tear cardboard flap up, then pull the plastic sleeve out;
- Remove wiper blade from the plastic sleeve;
- Push down on the adapter button while sliding off the cover;
- Remove the cover;
- Pinch the adapter side tabs and hold the adapter slightly angled;
- Firmly guide the wiper blade adapter into the wiper arm aligning the front and rear tabs;
- Release the side tabs;
- Viewing from the top, make sure all tabs are locked into the adapter;
- Once all tabs are locked in place, the wiper blade is installed. Ensure the wiper blade is fully attached before use.
